Single phase, primary switched mode power supply PEL 230/18-2,5 Advantages Stabilised and adjustable output voltage DC OK signalling via LEDs Parallel connection option Service-friendly spring-loaded connector system Panel installation on mounting rails Applications Primary switch mode power supply is concentrated on the core task of voltage and current supply. Flat step profile optimized for installation in control panels in the building automation. Standards Z Primary switched mode power supply to UL 60950, UL 508 Safety: EN 61558-2-16, EN 60950-1 EMC: EN 61204-3 Approvals W oZ UL/CSA 60950 recognised (E213214), UL508 listed (E219022) Germanischer Lloyd prepared Single phase, primary switched mode power supply PEL 230/18-2,5 PEL 230/18-2,5 Input rated voltage Input voltage range Input rated current (rated load) Rated frequency range Starting current limiter Input fuse internal Recommended back-up fuse (circuit breaker) Mains buffering Transient surge voltage protection 100 - 240 Vac 85 - 264 Vac (120 - 373 Vdc) 0.72 / 0.42 A (110 / 230 Vac) 44 - 66 Hz / 0 Hz <30 A, NTC 4 A (slow-blow) 6 A, 10 A, 16 A, characteristics B, C 25 / 120 ms Varistor Type PEL 230/18-2,5 Terminal and mounting Connections output, (spring clamp terminal) Connections input, (spring clamp terminal) Mounting position Fixing method max. 2.5 mm max. 2.5 mm vertical DIN Rail system TH 35 Measures and weights 0.24 kg Weight Output 59.0 .0 54.0 .0 18 Vdc 2 % 15 - 28 Vdc 2.50 A 35 Vdc Constant current typ. 50 mVss Yes Yes typ. 83 % 72 Output rated voltage Output voltage range Output rated current Resistance to reverse feed max. Overload behaviour Ripple factor Parallel connection Serial operation Efficiency 89 Signaling Power Good (DC OK) LED green Standards Classification Primary switched mode power supply Approvals Approvals in preparation Environment Ambient temperature Storage temperature Derating Current capacity by any mounting position -25 C to +55 C -25 C to +85 C -3 %/K > +45 C max. 1.6 A Safety and protection Protection index Safety class IP 20 II, (in closed cabinet) Order numbers Order Number PEL 230/18-2,5 Subjects to change. + Input 30 Type